iTurboSim Instruction Apply iPhone Firmware: 1.1.2

Jailbreak Iphone in 1.1.1 and 1.1.2 (Windows Format)

This instruction page is to show you that My iTurbosim absolutely works to unlockout of the box 1.1.2 (UK/USA) with the Bootloader 4.6

Bootloader comes with the serial number xxx45 and above.

The below picture with the serial number xxx46 which has Bootloader 4.6

STEPS by STEPS Jailbreak 1.1.2 by downgrading to 1.1.1 and “Upgrade” to 1.1.2 again

1. Connect your Iphone with your PC and Open your iTunes;

2. PRESS "Home" + "Sleep (Power Off Button)" until iTunes jump and says "Check for Update" and "Restore";

3. Press your keyboard “SHIFT” + Click on “Restore” it will show something like the Picture below for you to choose the 1.1.1 Restore Firmware.

If you do not have the 1.1.1 firmware. Click below to download it from apple store:

Firmware 1.1.1 (DOWNLOAD if you do not have it )

4. Your Iphone will go to downgrading process to 1.1.1.

5. It will come out with an error message Error 1015

6. To Kick on the Recovery Mode. Open a Program call AppTappInstaller , You can click the Link to download this program. Click on Continue and Choose 1.0.2 (Sometimes it goes to Download State)

AppTappInstaller (DOWNLOAD)

7. It will appear with an sending to iPhone Failed (Now Your Iphone is Really in 1.1.1)

JailBreaking 1.1.1.

8. Slide for Emergency Call. Press *#301# like in picture and press call. (Do not Freak Out, your iphone is ringing)

9. Now, Delete all the numbers *#307# on the scre�n and Enter Number “0” and place Call again it will show like the picture below

10. Now Press Answer it will show as picture below

11. Press Hold and then Decline this time it will go to screen below and Click on Add Contact

12. Click on Add 2 URLs and add “prefs:” and “jailbreakme.com”

14. Now. On Info Screen Click on homepage Prefs: (This will bring you to Setting Page of your Iphone) Now Set your Wi-fi and Also Set Auto Lock Never

15. Now you need to redo steps 9 11. (this time you have wi-fi) Click on the homepage “Jailbreakme.com” Slide down and Click on “Install Appsnapp”. It will go back Activation page and restart your iphone

16. After your iPhone restarted, You are fully Jailbreaked 1.1.1.

17. Click on “Installer” Install Tweak 1.1.1Install “OktoPrep”

18. Open your iTunes, Click on Help Check for Updates. (Update to Firmware 1.1.2)

Your iPhone should be successfully updated to 1.1.2

19. Now, we need to jailbreak 1.1.2. Easy Job. Just download Jailbreak 1.1.2 and extract it to a folder. Click on Jailbreak or Windows.bat

Jailbreak112.zip (DOWNLOAD)

20. It will pop up with a screen Check on SSH Jailbreak!!!

21. Restart your Iphone.! And Your Iphone will Restart by itself again!.

You are done. You have successfully Jailbreak your iPhone in 1.1.2

* Now iTurboSim and Your Simcard and you will Finally find (UNLOCKED!!!!!!!!!!!!!!!!!!!!!)

This is the Original iPhone Just now with the XXX46 It works with T-mobile After the iTurbosim inserted!!

INSTRUCTION FOR OUTSIDE U.S.

22. After you jailbroken 1.1.2, press Installer Tweaks 1.1.2 iWorld. (Choose your SimCard Country) Otherwise your iPhone will Crash when you make Phone Calls

*This iTurbosim At this Stage only works for 1.1.2. So, Do not update to newer firmware.

DOWNLOAD PAGE!!

Firmware 1.1.1 (DOWNLOAD if you do not have it )

AppTappInstaller (DOWNLOAD)

Jailbreak112.zip (DOWNLOAD)

VIDEOS Instructions in YOUTUBE.

Part 1 0f 3

Part 2 of 3

Part 3 of 3

ENJOY!!!!!!!!!

Jailbreak112.zip (You need WinRar to extract this file) <--------- Extra Link for Jailbreak112